Specifications

376 Chapter 17
GPIB Command Reference
FREQ:CENT
FREQ:CENT
Format [SENSe:]FREQuency:CENTer <numeric>
[SENSe:]FREQuency:CENTer?
Description Sets the center value in the frequency sweep range (linear/log sweep).
In addition, use the FREQ:SPAN command to set the span value in the sweep range.
Parameters
If the specified parameter is outside the range, the minimum (if the lower limit of the range
is exceeded) or maximum value (if the upper limit is exceeded) will be assumed.
Query response {numeric}<newline><^END>
Related commands FREQ:SPAN command on page 377
Front Panel
Equivalents
Stimulus - Start/Stop... - Center: Hz
<numeric>
Description Center value in the sweep range
Data type Floating point
Range 1E6 to 3E9
Default 1.5005E9
Resolution 1E-3
Unit Hz