Specifications

370 Chapter 17

GPIB Command Reference

DISP:TRAC{1-3}:Y:RPOS

Format DISPlay[:WINDow]:TRACe{1-3}:Y[:SCALe]:RPOSition <numeric>

DISPlay[:WINDow]:TRACe{1-3}:Y[:SCALe]:RPOSition?

Description Sets the following parameter for the display trace.

• Reference line position in the linear Y-axis format

Parameters

If the specified parameter is outside the range, the minimum (if the lower limit of the range

is exceeded) or maximum value (if the upper limit is exceeded) will be assumed.

Query response {numeric}<newline><^END>

Related commands DISP:TRAC{1-5}:Y:RLEV command on page 369

Front Panel

Equivalents

Scale - Scale... - Ref Pos

Sub-block Description

TRACe{1-3} Specifies the trace number (1 to 3)

Description Reference line position in the linear Y-axis format

Data type Floating point

Range 0 to 100

Default 50

Resolution 0.01