Specifications

Chapter 17 369
GPIB Command Reference
DISP:TRAC{1-5}:Y:RLEV
17. GPIB Command Reference
DISP:TRAC{1-5}:Y:RLEV
Format DISPlay[:WINDow]:TRACe{1-5}:Y[:SCALe]:RLEVel <numeric>
DISPlay[:WINDow]:TRACe{1-5}:Y[:SCALe]:RLEVel?
Description Sets the following parameters for the display trace.
• Reference value in the linear Y-axis format
• Reference value of Y-axis in the complex plain format (center value)
Parameters
Query response {numeric}<newline><^END>
Related commands DISP:TRAC{1-3}:Y:RPOS command on page 370
Front Panel
Equivalents
Scale - Scale... - Ref Val|Ref Y
Sub-block Description
TRACe{1-5} Specifies the trace number (1 to 5)
<numeric>
Description • Reference value in the linear Y-axis format
• Reference value of the Y-axis in the complex plane format
(center value)
Data type Floating point
Default Variable depending on the measurement parameter.
In the Linear Y-axis format:
5E-4 Cs/Cp
0.5 B/D/tanδ (ε)/tanδ (μ)/G/|Y|
0 |Γ|/Γx/Γy/θγ/θz/θy
5 Ls/Lp
500 Q
5E5 |εr|/εr'/εr"/|μr|/μr'/μr"/R/Rs/Rp/|Z|/X
In the Complex format:
0 Z/Y/Γ/εr/μr
Unit Variable depending on the measurement parameter