Specifications

Chapter 17 367
GPIB Command Reference
DISP:TRAC{1-5}:Y:FULL
17. GPIB Command Reference
DISP:TRAC{1-5}:Y:FULL
Format DISPlay[:WINDow]:TRACe{1-5}:Y[:SCALe]:FULL <numeric>
DISPlay[:WINDow]:TRACe{1-5}:Y[:SCALe]:FULL?
Description Sets the following parameters for the display trace:
• Full-scale value in the linear Y-axis format
• Scale value in the polar format
• Full-scale value in the complex plane format
Parameters
Query response {numeric}<newline><^END>
Sub-block Description
TRACe{1-5} Specifies the trace number (1 to 5)
<numeric>
Description
• Full-scale value in the linear Y-axis format
*1
• Scale value in the polar format
• Full-scale value in the complex plane format
*1
Data type Floating point
Range Variable depending on the measurement parameter.
In the Linear Y-axis format:
1E-3 Cs/Cp
1 B/D/tanδ (ε)/tanδ (μ)/G/|Y|
2 |Γ|/Γx/Γy
10 Ls/Lp
360 θγ/θz/θy
1E3 Q
1E6 |εr|/εr'/εr"/|μr|/μr'/μr"/R/Rs/Rp/|Z|/X
In the Polar format:
1 Z/Y/Γ/εr/μr
In the Complex format:
500 Z/Y/Γ/εr/μr
Unit Variable depending on the measurement parameter.
*1.When one-tenths value of full-scale is set with the DISP:TRAC{1-5}:Y:PDIV
command instead of setting full-scale value in the linear Y-axis or polar for-
mat, its 10-time value is set to the full-scale value.