Specifications

Chapter 17 365
GPIB Command Reference
DISP:TRAC{1-3}:Y:BOTT
17. GPIB Command Reference
DISP:TRAC{1-3}:Y:BOTT
Format DISPlay[:WINDow]:TRACe{1-3}:Y[:SCALe]:BOTTom <numeric>
DISPlay[:WINDow]:TRACe{1-3}:Y[:SCALe]:BOTTom?
Description Sets the minimum scale value in the Y-axis direction for the scalar trace.
In addition, use the DISP:TRAC{1-3}:Y:TOP command to set the maximum scale value.
Parameters
Query response {numeric}<newline><^END>
Related commands DISP:TRAC{1-3}:Y:TOP command on page 372
Front Panel
Equivalents
Scale - Scale... - Bottom
Sub-block Description
TRACe{1-3} Specifies the trace number (1 to 3)
<numeric>
Description Minimum scale value in the Y-axis direction
Data type Floating point
Default Variable depending on the measurement parameter.
In the Linear Y-Axis format:
-1 |Γ|/Γx/Γy
-200 θγ/θz/θy
0 B/D/Cs/Cp/|εr|/εr'/εr"/tanδ
(
μ)/G/Ls/Lp/|μr|/μr'/μr"/Q/R/Rs/Rp/X/|Z|/|Y|
In the Log Y-Axis format:
1E-9 Cs/Cp
1E-6 B/D/tanδ (ε)/tanδ (μ)/G/|Γ|/Γx/Γy/|Y|
1E-5 Ls/Lp
1E-4 θγ/θz/θy
1E-3 Q
1 |εr|/εr'/εr"/|μr|/μr'/μr"/R/Rs/Rp/|Z|/X
Unit Variable depending on the measurement parameter.