Specifications

358 Chapter 17
GPIB Command Reference
DISP:TRAC{1-3}:REF
DISP:TRAC{1-3}:REF
Format DISPlay[:WINDow]:TRACe{1-3}:REFerence[:STATe] {ON|OFF|1|0}
DISPlay[:WINDow]:TRACe{1-3}:REFerence[:STATe]?
Description Selects whether to display the scale reference line for the linear Y-axis format.
Parameters
Query response {1|0}<newline><^END>
Related commands DISP:TRAC{1-3}:Y:RPOS command on page 370
DISP:TRAC{1-5}:Y:RLEV command on page 369
Front Panel
Equivalents
Scale - Scale... - Reference Line [On/Off]
DISP:TRAC{1-5}:SEL
Format DISPlay[:WINDow]:TRACe{1-5}:SELect
Description Sets the specified trace to the active trace. (No query)
Parameters
Front Panel
Equivalents
Trace - Scalar{1|2|3}|Complex{4|5}
Sub-block Description
TRACe{1-3} Specifies the trace number (1 to 3)
Description
ON or 1 (Default) Displays the reference line.
OFF or 0 Does not display the reference line.
Sub-block Description
TRACe{1-5} Specifies the trace number (1 to 5)