Specifications

Chapter 17 343
GPIB Command Reference
CALC{1-5}:MST
17. GPIB Command Reference
CALC{1-5}:MST
Format CALCulate{1-5}[:EVALuate]:MSTatistics[:STATe] {ON|OFF|1|0}
CALCulate{1-5}[:EVALuate]:MSTatistics[:STATe]?
Description Displays the statistical analysis results. Statistical values (average value, standard
deviation, difference between maximum value and minimum value) in the marker partial
search range are calculated and displayed at every sweep completion. When the marker
display is set to off, no statistical analysis results are displayed. In addition, when the
marker partial search range is not set on with the
CALC{1-5}:MARK:FUNC:DOM
command, the statistical values in all sweep ranges are calculated and displayed.
It is necessary to set markers on with the CALC{1-5}:MARK{1-8} command or the
CALC{1-5}:MARK:REF command when you want to display the statistical analysis
results.
In addition, use the CALC{1-5}:MST:DATA? command to read the statistical value.
Parameters
Query response {1|0}<newline><^END>
Related commands CALC{1-5}:MST:DATA? command on page 344
CALC{1-5}:MARK{1-8} command on page 304
CALC{1-5}:MARK:REF command on page 328
CALC{1-5}:MARK:FUNC:DOM command on page 312
Front Panel
Equivalents
Marker - Fctn More... - Statistics [On/Off]
Sub-block Description
CALCulate{1-5} Specifies the trace number (1 to 5).
Description
ON or 1 Displays the statistical analysis result.
OFF or 0 (Default) Does not display the statistical analysis result.