Specifications

Chapter 17 339
GPIB Command Reference
CALC{1-5}:MARK{1-8}:Y?
17. GPIB Command Reference
CALC{1-5}:MARK{1-8}:Y?
Format CALCulate{1-5}:MARKer{1-8}:Y?
Description Reads the measurement value at the marker position. When the Δ mode is set to on and this
command is executed, the measurement value at the marker position is read in the form of
a relative value to the reference marker. (Query only)
Parameters
Query response {numeric 1}, {numeric 2}<newline><^END>
• With complex trace:
• With scalar trace:
Related commands CALC{1-5}:MARK{1-8}:X command on page 338
Front Panel
Equivalents
Unavailable.
Sub-block Description
CALCulate{1-5} Specifies the trace number (1 to 5).
MARKer{1-8} Specifies the marker number (1 to 8).
{numeric 1} {numeric 2}
Description Real part of measurement
value (complex type)
Imaginary part of
measurement value (complex
type)
Data type Floating point
{numeric 1} {numeric 2}
Description Measurement value of real
number type
0 is always read.
Data type Floating point