Specifications

334 Chapter 17

GPIB Command Reference

CALC{1-5}:MARK:REF:X

Format CALCulate{1-5}:MARKer:REFerence:X <numeric>

CALCulate{1-5}:MARKer:REFerence:X?

Description Moves the reference marker (marker R) to the position of the stimulus value specified on

the trace. The stimulus value at the reference marker position is read when executing the

command by query.

In addition, use the CALC{1-5}:MARK:REF:Y command to read the measurement value

at the reference marker position.

Parameters

If the specified parameter is outside the range, the minimum (if the lower limit of the range

is exceeded) or maximum value (if the upper limit is exceeded) will be assumed.

Query response {numeric}<newline><^END>

Related commands CALC{1-5}:MARK:REF:Y command on page 335

Front Panel

Equivalents

Marker - Marker... - Select Marker (Specifies marker R)

Marker - Marker... - Stimulus

Sub-block Description

CALCulate{1-5} Specifies the trace number (1 to 5).

Description Sets the stimulus value (or sets the measurement point, if the

stimulus range is set to zero span and marker x-axis unit is set to

time) at the marker position

Data type Floating point

Range Variable depending on the marker x-axis unit and sweep

parameter.

Default Variable depending on the marker x-axis unit and sweep

parameter.

Unit Variable depending on the marker x-axis unit and sweep

parameter.