Specifications

330 Chapter 17
GPIB Command Reference
CALC{1-5}:MARK:REF:FUNC:DOM:LIM:LOW
CALC{1-5}:MARK:REF:FUNC:DOM:LIM:LOW
Format CALCulate{1-5}:MARKer:REFerence:FUNCtion:DOMain:LIMit:LOWer <numeric>
CALCulate{1-5}:MARKer:REFerence:FUNCtion:DOMain:LIMit:LOWer?
Description Sets the lower test limit value at the reference marker position when using the limit test
function.
In addition, use the CALC{1-5}:MARK:REF:FUNC:DOM:LIM:UP command to set the
upper test limit value.
Parameters
Query response {numeric}<newline><^END>
Related commands CALC{1-5}:MARK:REF:FUNC:DOM:LIM:UP command on page 332
Front Panel
Equivalents
Marker - Limit... - Lower
Sub-block Description
CALCulate{1-5} Specifies the trace number (1 to 5).
<numeric>
Description Lower test limit value
Data type Floating point
Range -1E12 to 1E12
Default 0
Unit Variable depending on the measurement parameter.