Specifications

Chapter 17 329
GPIB Command Reference
CALC{1-5}:MARK:REF:ACT
17. GPIB Command Reference
CALC{1-5}:MARK:REF:ACT
Format CALCulate{1-5}:MARKer:REFerence:ACTivate
Description Sets the reference marker to the active marker. (No query)
In addition, use the CALC{1-5}:MARK{1-8}:ACT command to set markers 1-8 to the
active marker.
Parameters
Related commands CALC{1-5}:MARK{1-8}:ACT command on page 305
Front Panel
Equivalents
Marker - Marker... - Select Marker (Specifies the marker R)
Alternatively, click on the reference marker directly.
CALC{1-5}:MARK:REF:FUNC:DOM:LIM
Format CALCulate{1-5}:MARKer:REFerence:FUNCtion:DOMain:LIMit[:STATe]
{ON|OFF|1|0}
CALCulate{1-5}:MARKer:REFerence:FUNCtion:DOMain:LIMit[:STATe]?
Description Selects whether to set the reference marker as the test marker when using the limit test
function.
Parameters
Query response {1|0}<newline><^END>
Front Panel
Equivalents
Marker - Limit... - Test Marker [On/Off]
Sub-block Description
CALCulate{1-5} Specifies the trace number (1 to 5).
Sub-block Description
CALCulate{1-5} Specifies the trace number (1 to 5).
Description
ON or 1 Sets the reference marker as the test marker.
OFF or 0 (Default) Does not set the reference marker as the test marker.