Specifications

328 Chapter 17

GPIB Command Reference

CALC{1-5}:MARK:REF

Format CALCulate{1-5}:MARKer:REFerence[:STATe] {ON|OFF|1|0}

CALCulate{1-5}:MARKer:REFerence[:STATe]?

Description Turns on/off the reference marker (marker R). However, only displaying the reference

marker does not set on the

Δ mode for using the reference marker in Δ mode. Use the

CALC{1-5}:MARK:REF:TYPE command to turn on the Δ mode.

In addition, use the CALC{1-5}:MARK{1-8} command to turn on/off markers 1-8.

Also, use the CALC{1-5}:MARK:AOFF command to turn off all of the markers on the

specified trace.

Parameters

Query response {1|0}<newline><^END>

Related commands CALC{1-5}:MARK:REF:TYPE command on page 333

CALC{1-5}:MARK{1-8} command on page 304

CALC{1-5}:MARK:AOFF command on page 305

Front Panel

Equivalents

Marker - Marker... - Select Marker (Specifies the marker R)

Marker - Marker... - Selected Marker [On/Off]

Sub-block Description

CALCulate{1-5} Specifies the trace number (1 to 5).

Description

ON or 1 Turns on the reference marker.

OFF or 0 (Default) Turns off the reference marker.