Specifications

318 Chapter 17
GPIB Command Reference
CALC{1-5}:MARK{1-8}:FUNC:DOM:LIM:UP
CALC{1-5}:MARK{1-8}:FUNC:DOM:LIM:UP
Format CALCulate{1-5}:MARKer{1-8}:FUNCtion:DOMain:LIMit:UPper <numeric>
CALCulate{1-5}:MARKer{1-8}:FUNCtion:DOMain:LIMit:UPper?
Description Sets the upper test limit value at the specified marker position when using the limit test
function.
In addition, use the CALC{1-5}:MARK{1-8}:FUNC:DOM:LIM:LOW command to set
the lower test limit value.
Parameters
Query response {numeric}<newline><^END>
Related commands CALC{1-5}:MARK{1-8}:FUNC:DOM:LIM:LOW command on page 316
Front Panel
Equivalents
Marker - Limit... - Upper
Sub-block Description
CALCulate{1-5} Specifies the trace number (1 to 5).
MARKer{1-8} Specifies the marker number (1 to 8).
<numeric>
Description Upper test limit value
Data type Floating point
Range -1E12 to 1E12
Default 0
Unit Variable depending on the sweep parameter.