Specifications

Chapter 17 309
GPIB Command Reference
CALC:MARK:COUP
17. GPIB Command Reference
CALC:MARK:COUP
Format CALCulate:MARKer:COUPle {ON|OFF|1|0}
CALCulate:MARKer:COUPle?
Description As the marker movement setting, selects either the mode in which the markers on all traces
are coupled when moved (coupled marker mode) or the mode in which the markers on the
differernt traces are moved separately (uncoupled marker mode).
If the markers on other traces are at different positions than that of the marker on the active
trace, they are moved when the mode is changed from the uncoupled marker mode to the
coupled marker mode.
Parameters
Query response {1|0}<newline><^END>
Front Panel
Equivalents
Marker - Marker... - More - Coupled Marker: [On/Off]
CALC{1-5}:MARK:DISC
Format CALCulate{1-5}:MARKer:DISCrete {ON|OFF|1|0}
CALCulate{1-5}:MARKer:DISCrete?
Description Switches between the continuous marker mode (marker movable throughout the range
defined by the measurement points) and the discrete marker mode (marker movable only to
the measurement points).
Parameters
Query response {1|0}<newline><^END>
Front Panel
Equivalents
Marker - Marker... - More - Marker: [Continuous/Discrete]
Description
ON or 1 (Default) Specifies the coupled marker mode.
OFF or 0 Specifies the uncoupled marker mode.
Sub-block Description
CALCulate{1-5} Specifies the trace number (1 to 5).
Description
ON or 1 Specifies the discrete marker mode.
OFF or 0 (Default) Specifies the continuous marker mode.