Specifications

308 Chapter 17
GPIB Command Reference
CALC{1-5}:MARK:APE:EXC:Y
CALC{1-5}:MARK:APE:EXC:Y
Format CALCulate{1-5}:MARKer:APEak:EXCursion:Y <numeric>
CALCulate{1-5}:MARKer:APEak:EXCursion:Y?
Description Sets the ΔY value to define the peak in the marker peak search function.
In addition, use the CALC{1-5}:MARK:APE:EXC:X command to set the ΔX value.
Parameters
If the specified parameter is outside the range, the minimum (if the lower limit of the range
is exceeded) or maximum value (if the upper limit is exceeded) will be assumed.
Query response {numeric}<newline><^END>
Related commands CALC{1-5}:MARK:APE:EXC:X command on page 307
CALC{1-5}:MARK:APE:SET command on page 306
Front Panel
Equivalents
Marker - Function... - Search Def & Range Menu - Peak Delta Y
Sub-block Description
CALCulate{1-5} Specifies the trace number (1 to 5).
<numeric>
Description ΔY value
Data type Floating point
Range 0 to 100E6
Default 1
Unit Variable depending on the measurement parameter.