Specifications

Chapter 17 307
GPIB Command Reference
CALC{1-5}:MARK:APE:EXC:X
17. GPIB Command Reference
CALC{1-5}:MARK:APE:EXC:X
Format CALCulate{1-5}:MARKer:APEak:EXCursion:X <numeric>
CALCulate{1-5}:MARKer:APEak:EXCursion:X?
Description Sets the ΔX value to define the peak in the marker peak search function.
In addition, use the CALC{1-5}:MARK:APE:EXC:Y command to set the ΔY value.
Parameters
If the specified parameter is outside the range, the minimum (if the lower limit of the range
is exceeded) or maximum value (if the upper limit is exceeded) will be assumed.
Query response {numeric}<newline><^END>
Related commands CALC{1-5}:MARK:APE:EXC:Y command on page 308
CALC{1-5}:MARK:APE:SET command on page 306
Front Panel
Equivalents
Marker - Function... - Search Def & Range Menu - Peak Delta X
Sub-block Description
CALCulate{1-5} Specifies the trace number (1 to 5).
<numeric>
Description ΔX value
Data type Floating point
Range 0 to 3E9 Frequency sweep
0 to 41 Oscillator power level sweep
0 to 502E-3 Oscillator voltage level sweep
0 to 10E-3 Oscillator current level sweep
0 to 80 dc bias voltage sweep
0 to 100E-3 dc bias current sweep
Default 10E6
Unit Variable depending on the sweep parameter.