Specifications

306 Chapter 17

GPIB Command Reference

CALC{1-5}:MARK:APE:SET

Format CALCulate{1-5}:MARKer:APEak:SET

Description Sets the ΔX and ΔY values of peak definition so that the active marker position is

recognized as the peak. Therefore, ΔX is set to the stimulus value difference between the

active marker and the adjacent left measurement point, while ΔY is set to the measurement

value difference between them. When the Δ mode is set to on, ΔX and ΔY are set to the

differences in the stimulus values and the measurement values between the reference

marker and the active marker, respectively. (No query)

Parameters

Related commands CALC{1-5}:MARK:APE:EXC:X command on page 307

CALC{1-5}:MARK:APE:EXC:Y command on page 308

Front Panel

Equivalents

Marker - Function... - Search Def & Range Menu - Marker to Peak Delta

Sub-block Description

CALCulate{1-5} Specifies the trace number (1 to 5).