Specifications

302 Chapter 17

GPIB Command Reference

CALC:FORM:PAR:MAG

Format CALCulate:FORMat:PARameter:MAGnetic <numeric 1>,<numeric 2>,<numeric 3>

CALCulate:FORMat:PARameter:MAGnetic?

Description Sets the inner diameter, outer diameter, and height of the toroidal core in the magnetic

measurement. This command is available when Option 002 (material measurement

software) is installed.

Parameters

If the specified parameter is outside the range, the minimum (if the lower limit of the range

is exceeded) or maximum value (if the upper limit is exceeded) will be assumed.

Query response {numeric 1}, {numeric 2}, {numeric 3}<newline><^END>

Front Panel

Equivalents

Utility - Material Option... - Height|Inner Diameter|Outer Diameter

Description Inner diameter of

core

Outer diameter of

core

Height of core

Data type Floating point Floating point Floating point

Range (16454S) 3.04E-3 to 9E-3 3.04E-3 to 9E-3 1E-5 to 3.65E-3

Range (16454L) 3E-3 to 21E-3 3E-3 to 21E-3 1E-5 to 11.6E-3

Default (16454S) 3.04E-3 9E-3 3.65E-3

Default (16454L) 3E-3 21E-3 11.6E-3

Resolution 1E-7 1E-7 1E-9

Unit m (meter) m (meter) m (meter)