Specifications

Chapter 17 301
GPIB Command Reference
CALC{1-3}:FORM:PAR:EPH
17. GPIB Command Reference
CALC{1-3}:FORM:PAR:EPH
Format CALCulate{1-3}:FORMat:PARameter:EPHase {ON|OFF|1|0}
CALCulate{1-3}:FORMat:PARameter:EPHase?
Description Turns on/off the expanded phase display function, which allows phases to be below -180 or
above 180 degrees, when the measurement parameter is the phase. This command is
ignored for measurement parameters other than phase.
Parameters
Query response {1|0}<newline><^END>
Front Panel
Equivalents
Meas Format - Meas/Format... - Expand Phase [On/Off]
Sub-block Description
CALCulate{1-3} Specifies the trace number (1 to 3).
Description
ON or 1 (Default) Set the expanded phase display to on.
OFF or 0 Set the expanded phase display to off.