Specifications

298 Chapter 17

GPIB Command Reference

CALC{1-5}:FORM

Format • With scalar trace

CALCulate{1-3}:FORMat

{Z|Y|LS|LP|CS|CP|RS|RP|D|Q|R|X|G|B|ZPH|YPH|RC|RCPH|RCX|RCY|P|PRE|PLF|P

LT|DC|DCR|DCLF|DCLT}

CALCulate{1-3}:FORMat?

• With complex trace

CALCulate{4-5}:FORMat {Z|Y|RC|P|DC}

CALCulate{4-5}:FORMat?

Description Sets the measurement parameters. A maximum of five measurement parameters can be

arbitrarily selected.

Parameters The following measurement parameters can be selected:

• With scalar trace:

Sub-block Description

CALCulate{1-3} Specifies the trace number (1 to 3).

Description

Z Absolute value of impedance (|Z|)

Y Absolute value of admittance (|Y|)

LS Equivalent series inductance (Ls)

LP Equivalent parallel inductance (Lp)

CS Equivalent series capacitance (Cs)

CP Equivalent parallel capacitance (Cp)

RS Equivalent series resistance (Rs)

RP Equivalent parallel resistance (Rp)

D Dissipation factor (D)

Q Quality factor (Q)

R Series resistance (R)

X Reactance (X)

G Conductance (G)

B Susceptance (B)

ZPH Phase of impedance (θz)

YPH Phase of admittance (θy)