Specifications

292 Chapter 17
GPIB Command Reference
CALC:DATA:MON?
CALC:DATA:MON?
Format CALCulate:DATA:MONitor? {V|I}
Description Reads the dc bias level monitor array of all measurement points. This command is
available when Option 001 (dc bias function) is installed. The dc bias monitor function has
to be set to on by using the
CALC:BMON command before sending this command.
(Query only)
Parameters
Query response {numeric 1}, {numeric 2},.., {numeric N-1}, {numeric N}<newline><^END>
Where N is the number of measurement points.
It is read in the floating-point value.
Related commands CALC:BMON command on page 291
FORM:DATA command on page 374
Front Panel
Equivalents
Unavailable.
Description
V Specifies the voltage value.
I Specifies the current value.