Specifications

Chapter 17 291
GPIB Command Reference
CALC:BMON
17. GPIB Command Reference
CALC:BMON
Format CALCulate[:EVALuate]:BMONitor[:STATe] {ON|OFF|1|0}
CALCulate[:EVALuate]:BMONitor[:STATe]?
Description Turns on/off the dc bias monitor function. This command is available when Option 001 (dc
bias function) is installed.
It is necessary to set markers with the CALC{1-5}:MARK{1-8} command or the
CALC{1-5}:MARK:REF command before sending this command.
In addition, use the CALC:DATA:MON? command to read the dc bias level monitor
array.
Parameters
Query response {1|0}<newline><^END>
Related commands CALC:DATA:MON? command on page 292
CALC{1-5}:MARK{1-8} command on page 304
CALC{1-5}:MARK:REF command on page 328
Front Panel
Equivalents
Stimulus - Source... - Bias Monitor: [On/Off]
Description
ON or 1 Turns on the dc bias monitor function.
OFF or 0 (Default) Turns off the dc bias monitor function.