Specifications

290 Chapter 17
GPIB Command Reference
CALC:AVER:COUN
CALC:AVER:COUN
Format CALCulate:AVERage:COUNt <numeric>
CALCulate:AVERage:COUNt?
Description Sets the averaging factor when using the sweep averaging function. Only setting the
averaging factor does not set the sweep averaging function to on.
In addition, use the CALC:AVER command to set the sweep averaging function to on.
Parameters
If the specified parameter is outside the range, the minimum (if the lower limit of the range
is exceeded) or maximum value (if the upper limit is exceeded) will be assumed.
Query response {numeric}<newline><^END>
Related commands CALC:AVER command on page 289
Front Panel
Equivalents
Meas/Format - Meas/Format... - Swp Avg Count
<numeric>
Description Sweep averaging factor
Data type Integer
Range 1 to 999
Default 16