Specifications

Chapter 17 289
GPIB Command Reference
CALC:AVER
17. GPIB Command Reference
CALC:AVER
Format CALCulate:AVERage[:STATe] {ON|OFF|1|0}
CALCulate:AVERage[:STATe]?
Description Turns on/off the sweep averaging function.
In addition, use the CALC:AVER:COUN command to set the averaging factor.
Parameters
Query response {1|0}<newline><^END>
Related commands CALC:AVER:COUN command on page 290
Front Panel
Equivalents
Meas/Format - Meas/Format... - Sweep Average[On/Off]
CALC:AVER:CLE
Format CALCulate:AVERage:CLEar
Description Resets the sweep averaging. Also restarts the sweep from the sweep count 1 when the
E4991A is performing sweep. (No query)
Front Panel
Equivalents
Meas/Format - Meas/Format... - Sweep Average Restart
Description
ON or 1 Turns on the sweep averaging function.
OFF or 0 (Default) Turns off the sweep averaging function.