Specifications

Chapter 17 283
GPIB Command Reference
*SRE
17. GPIB Command
Reference
*SRE
Format *SRE <numeric>
*SRE?
Description Sets the value of the Service Request Enable register.
See Figure B-3, “Status Register Structure (1/2),” on page 561, for details of the status
register structure.
Parameters
If the specified parameter is outside the range, the bit-by-bit logical sum resulting from an
AND operation with 255 (0xff) will be assumed. Bit 6 cannot be set to 1.
Query response {numeric}<newline><^END>
Related commands *STB? command on page 283
Front Panel
Equivalents
Unavailable.
*STB?
Format *STB?
Description Returns the value of the Status Byte register. (Query only)
See Figure B-3, “Status Register Structure (1/2),” on page 561, for details of the status
register structure.
See Table B-1, “Status Bit Definition of Status Byte Register,” on page 563 for the bit
definition of the Status Byte register.
Query response {numeric}<newline><^END>
Returns the integer value.
Front Panel
Equivalents
Unavailable.
<numeric>
Description Setting of the Register
Data type Integer
Range 0 to 255
Default 0