Specifications
20 Chapter 1
To Make Effective Use of This Manual
Contents of this manual
Contents of this manual
This is the programming manual of the E4991A RF Impedance/Material Analyzer. The
contents of each chapter in this manual are as follows.
Chapter 1, “To Make Effective Use of This Manual”
This chapter describes the contents of this programming manual and how to use it.
Chapter 2, “Outline of Remote Control”
This chapter explains the system structures, required equipment, and set up methods
needed to structure the remote control system of the E4991A.
Chapter 3, “Setting Measurement Conditions”
This chapter explains how to set the measurement conditions of the Agilent E4991A.
Chapter 4, “Preparation for Accurate Measurement”
This chapter explains how to perform calibration as well as electrical length and
fixture compensation for the Agilent E4991A.
Chapter 5, “Measurement Start and Detection of Measurement End”
This chapter explains how to prepare a trigger for starting measurement and
detecting the end of measurement with the Agilent E4991A.
Chapter 6, “Read and Write Measurement Data”
This chapter explains how to read and write Agilent E4991A measurement data.
Chapter 7, “Measurement Result Processing”
This chapter explains how to process measurement results by using the Agilent
E4991A’s marker function and equivalent circuit analysis function.
Chapter 8, “Save and Recall Files”
This chapter explains how to save the Agilent E4991A’s measurement condition
settings or measurement results to a file and how to later recall them from the file.
Chapter 9, “Using Printer”
This chapter explains how to use a printer connected to the Agilent E4991A to print
out measurement results and other information from the instrument.
Chapter 10, “Setting the Display”
This chapter explains how to set the display screen of the Agilent E4991A.
Chapter 11, “Error Handling”
This chapter describes how the Agilent E4991A handles errors in program execution.
Chapter 12, “Shutting Down the Instrument”
This chapter explains how to properly shut down the Agilent E4991A.