Specifications

Chapter 10 199

Setting the Display

10. Setting the Display

Use Memory Trace

Use the following GPIB command to copy the measurement data to the memory trace.

• CALC{1-5}:MATH:MEM on page 341

Select Trace to Be Displayed

If measurement data is not copied to memory, only the data trace can be displayed on the

screen. If measurement data is copied to memory, one of the following can be selected for

display on the screen.

• Data trace

• Memory trace

• Data trace and memory trace

• Operation results between data trace and memory trace

Use the following GPIB command to select the trace(s) to be displayed.

• CALC{1-5}:MATH:FUNC on page 340

Set Offset (Scalar Trace)

Scalar trace allows you to display the results obtained by subtracting any offset value from

a data trace value. Use the following GPIB command to set the offset value. Note that the

offset value can be set for each parameter.

• CALC{1-3}:MATH:OFFS on page 342

Enter and Display Trace Title

Any title can be displayed in the title area at the top of the window.

Use the following GPIB command to enter a title (string).

• DISP:TRAC{1-5}:TITL:DATA on page 361

Use the following GPIB command to display the title.

• DISP:TRAC{1-5}:TITL on page 360