Technical data

Installing Agilent I/O Libraries Suite 2
Agilent Connectivity Guide 27
4 Insert the Automation-Ready CD with Agilent IO Libraries Suite into
the CD-ROM drive of your PC.
• Wait a few seconds for the auto-run window to appear.
• If the auto-run window does not appear automatically,
• Click Start > Run...
• Type:
<drive>:Autorun\IOLibraries.hta
where <drive> is your CD drive letter.
5 When the installation start-up window appears, click the “Click here
to install now” button once, and wait for the InstallShield Wizard to
appear.
Note: you also have the opportunity to watch a two-minute video
how easy it is to install, set-up and configure your interfaces and
instruments using Agilent IO Libraries Suite 15.5.
6 When the InstallShield Wizard appears, click Next > to begin the IO
Libraries Suite software installation.
7 Read the License Agreement(s). If you accept the terms, click the
radio button labeled I accept the terms of the license agreement
and then click Next > to continue.
8 When the InstallShield Wizard Setup Type dialog box appears, as
shown, select Typical or Custom, then click OK. The Typical setup
installs the recommended features for your configuration in standard
locations on your PC. In a Typical setup, if another vendor’s VISA
software is already installed on this PC, Agilent VISA is installed as
secondary. If no other vendor’s VISA software is found on this PC,
NOTE
If the IVI Shared Components and VISA Shared Components are
not already installed on your PC, Agilent IO Libraries Suite installs
them in the standard, default locations. If the IVI Shared Components
and VISA Shared Components are already installed, the Agilent IO
Libraries Suite installer will upgrade them to the latest version (if
necessary), using the same installation location used by the older
version. If this is a first-time installation, you will be able to select
installation locations for these components by choosing a Custom
Installation.