Technical data

132 Agilent Connectivity Guide
5 Connecting Instruments to LAN
By default, the Agilent IO Control is always active after the Agilent IO
Libraries Suite is installed and the blue
IO icon is displayed. However,
the IO Control may be active even though the blue
IO icon is not
displayed. There are two ways that the blue
IO icon can be hidden:
•
Clicking Hide Agilent IO Control. Clicking the blue IO icon and
then clicking
Hide Agilent IO Control hides the blue IO icon, but
does
not deactivate the Agilent IO Control. (You can also do this
from the Connection Expert
View menu.)
•
Clicking Exit. Clicking the blue IO icon and then clicking Exit
causes a dialog box to appear that asks you if you want to
terminate the Agilent IO Control. Clicking
Ye s hides the blue IO
icon
and deactivates the Agilent IO Control.
If the blue
IO icon is not displayed, either the blue IO icon display has
been turned off and/or the Agilent IO Control is not active. In this case,
click
Start > Programs > Agilent IO Libraries Suite > Utilities > IO Control
to re-start the Agilent IO Control and to display the blue IO icon.