Technical data

126 Agilent Connectivity Guide
5 Connecting Instruments to LAN
Web Browser Checks
To see if your PC has network access to an instrument, open the Web
browser on the PC and type in the instrument’s IP address (or hostname,
if known) on the web browser’s address line.
If the instrument’s
Welcome Page appears, this PC has network
connection to the instrument. Repeat this step for each instrument on the
network. An example for the Agilent 33220A follows.
Example: Using a Web Browser
Since the 33220A is Web-enabled, to display the 33220A
Welcome Page,
first determine the 33220A IP address from the instrument’s front panel
display. Next, open your web browser and type
‘http://<33220A IP
Address>
’, where <33220A IP Address> is the IP address displayed on the
front panel.
Then, press
Enter to display the 33220A Welcome page.
For example, if the current IP address is 169.254.3.2, typing
http://169.254.3.2 and pressing Enter displays the 33220A Welcome page.
This figure shows a portion of an example
Welcome page display for the
Agilent 33220A.
Figure 48 Agilent 3320A Web Browser Welcome Page