Technical data
Getting Started 1
Agilent Connectivity Guide 11
GPIB
• Configure GPIB Network
• Install instrument drivers
See Chapter 3, Connecting
Instruments to GPIB
• Select LAN Network
• Configure Instruments
• Install instrument drivers
See Chapter 5, Connecting
Instruments to LAN
• Using IVI-COM
• Using VISA
• Using SICL
• Troubleshooting
See Chapter 6, Programming Your Instruments
• What is IO Libraries Suite
• Installing IO Libraries Suite
• IO Libraries Revision History
See Chapter 2, Installing IO Libraries Suite
• TCP/IP Protocol
• IP Addressing
• Network Services
See Chapter 7, TCP/IP Network Basics
USB
LAN
Step 4. Program Your Instruments
TCP/IP Network Basics
• Configure USB Network
• Install instrument drivers
See Chapter 4, Connecting
Instruments to USB
Installing IO Libraries Suite
Step 1. Install Agilent IO
Libraries Suite v15.x
• From Agilent Control icon, run
Connection Expert
• Configure GPIB Interface(s)
as needed
• Use Interactive IO utility to
verify communication
See Chapter 3, Connecting
Instruments to GPIB
• From Agilent Control icon, run
Connection Expert
• Use Interactive IO utility to
verify communication
See Chapter 4, Connecting
Instruments to USB
• From Agilent Control icon, run
Connection Expert
• Right click on LAN interface to
add instruments
• Use Interactive IO utility to
verify communication
See Chapter 5, Connecting
Instruments to LAN
See Chapter 2, Installing IO Libraries Suite
Step 2. Connect Instruments, Install Drivers
Step 3. Configure Interfaces, Identify and Communicate with Instruments