Technical data

108 Agilent Connectivity Guide
5 Connecting Instruments to LAN
Connecting a GPIB, USB, etc. instrument on a LAN Gateway
1 From the Connection Expert main screen, select the LAN interface
node in the Explorer Pane, LAN (TCPIP0) for this example.
Right-click to get a menu. Then click Add Instrument.
(Alternatively, you could click the Add Instrument button on the
tool bar, the Task Guide, or the I/O Configuration menu.)
This opens the Add LAN Instruments dialog box. Select the Add
Other tab (shown below).
Since your device is remote (connected through a gateway device
such as the Agilent E5810A), click the Other LAN Instruments
button. Continue with Step 2 below.
Figure 35 Add LAN Instruments Add Other Tab