Installation guide

Chapter 1 9

Introducing the IO Libraries

Using This Guide

This guide shows how to install and configure the Agilent IO Libraries

software.

What’s in This Guide?

The steps described in this guide assume:

n The software will be installed on a Windows-based PC instrument

system. The PC can be an external or an embedded PC.

n You have already installed and configured the interfaces for your

system and have installed any required application programs

(C/C++, Agilent VEE, etc.).

n For an overview of the Agilent IO Libraries, see Chapter 1 -

Introducing the IO Libraries. To install the Agilent IO Libraries, see

Chapter 2 - Installing the IO Libraries. To use IO utilities (such as

IO Config) to configure the IO Libraries, see Chapter 3 - Using IO

Configuration Utilities. For details on configuring interfaces, see

Chapter 4 - Configuring I/O Interfaces.

If You Need Help

n In the USA and Canada, you can reach Agilent Technologies at

these telephone numbers:

USA: 1-800-452-4844

Canada: 1-877-894-4414

n Outside the USA and Canada, contact your country’s Agilent support

organization. A list of contact information for other countries is

available on the Agilent web site:

http://www.agilent.com/find/assist