Installation guide

Chapter 3 63
Using IO Configuration Utilities
Using the VXI Resource Manager
Opening VXI Resource Manager
The easiest way to view this output is to use the IO Config utility to run the
VXI Resource Manager. Click Start|Programs|Agilent IO
Libraries|IO Config OR click the Agilent IO Libraries Control icon and
select Run I
O Config to display the IO Config main panel. Highlight the
E8491 IEEE 1394 to VXI entry. Then, click Configure.
On the
E8491 VXI Board Configuration screen, change the settings for your
system, as required. When complete, click OK to re-display the main screen.