Installation guide

Chapter 3 57
Using IO Configuration Utilities
Using IO Config
Running IO Config
The purpose of IO Config is to configure an I/O interface for use with VISA or
SICL. IO Config does this by associating a unique VISA and/or SICL name
with a hardware interface. To begin this configuration:
1 Open IO Config by double-clicking the
IO Config icon in the IO
Libraries
program group or by clicking the Agilent IO Libraries
Control
icon (blue IO icon on the Windows taskbar) and then
selecting Run I
O Config. The following figure shows a typical
display.
NOTE
If your system includes interfaces not shown on the typical display in the
following figure, those interface names will automatically appear on the
main screen. Follow the on-screen instructions to use IO Config to
configure your system.