Installation guide

Chapter 2 47
Installing the IO Libraries
Maintaining Existing IO Libraries
6 After the modified setup is installed, the IO Libraries Configuration
screen appears. Select an option and then click
Next > to
complete the modification process
.
n
If you select “Refresh configured interfaces” or “Auto-configure all
interfaces”, all applicable interfaces are refreshed or configured.
n If you select “Manually configure interfaces”, the IO Config utility
appears from which you can manually configure interfaces. See
Chapter 3 - Using IO Configuration Utilities for information on IO
Config.
n If you select “Do not configure interfaces now”, the Setup
Complete
screen appears that reminds you to run the IO Config
utility. See Chapter 3 - Using IO Configuration Utilities for
information on IO Config.