User`s manual

Getting Started 27Chapter 1
Attaching a
Terminal Module to
the Relay Switch
Module
Figure 1-15 gives guidelines to attach a terminal module to a component
module.
Figure 1-15. Attaching a Terminal Module to the Relay Matrix Switch Module
Extraction Lever
levers and push both levers out simultaneously
use a small screwdriver to release the two extraction
To remove the terminal module from the E1468/69A,
Levers
Extraction
Align the terminal module connectors
to the E1468/69A connectors.
Extend the extraction levers on the
to free it from the E1468A/69A connectors.
onto the E1468/69A.
Push in the extraction levers
to lock the terminal module
E1468/69A.
4
the terminal module to the
Apply gentle pressure to attach
to release the two
Use small screwdriver
terminal module.
3
1
2
extraction levers
Extraction Lever
E1468/69A