User`s manual

Getting Started 19Chapter 1
Figure 1-7. Installing Relay Matrix Switches in a Mainframe
Slide the E1468/69A into any slot
(except slot 0) until the backplane
connectors touch.
To remove the module from the mainframe,
Tighten the top and bottom screws
to secure the module to
reverse the procedure.
the mainframe.
Levers
Extraction
Set the extraction levers out.
4
1
2
into the mainframe by
Seat the E1468/69A
pushing in the extraction
levers.
3
NOTE: The extraction levers will not
seat the backplane connectors on older
VXIbus mainframes. You must manually
seat the connectors by pushing in the
module until the module's front panel is
flush with the front of the mainframe. The
extraction levers may be used to guide or
remove the module.