Service manual

Chapter 3
Replaceable Parts
Introduction This chapter contains information for ordering replaceable parts for the
Agilent E1465A/E1466A/E1467A Relay Matrixes.
Ordering
Information
To order a part listed in this chapter, specify the Agilent Technologies part
number and the quantity required. Send the order to your nearest Agilent
Technologies Sales and Support Office.
Replaceable
Parts Lists
Table 3-1. Component Assembly Replaceable Parts
Reference
Designator
Agilent Part
Number
Qty Part Description
A2 1 MOD - HI DENSITY MATRIX (See Figure 3-1)
MP1 E1400-45102† 1 HANDLE -BOTTOM METAL INJECTION
MP2 E1400-45101† 1 HANDLE -TOP METAL INJECTION
MP3 8160-0686 1 RFI STRIP-FINGERS BE-CU TIN-PLATED
PNL1 E1466-00202† 1 PANEL-FRONT
SCR1-SCR2 E1400-00610† 2 SHOULDER SCREW ASSY
SCR3-SCR8 0515-1135 8 SCREW-MACHINE M3 X 0.5 25MM-LG FLAT-HD
SCR13 0515-1375 SCREW-MACHINE M2.5 X 0.45 6MM-LG FLAT-HD
SCR14-SCR15 0515-1135 SCREW-MACHINE M3 X 0.5 25MM-LG FLAT-HD
SHD1 E1466-00601 1 SHIELD-TOP
SHD2 E1466-00602 1 SHIELD-BOTTOM
† NOTE: For modules with serial numbers below 3126A00445 (E1465A), 3126A01090 (E1466A), or
3126A01109 (E1467A), the following parts must be used for replacement (see inset in figure 3-1).
*A2 E1466-66201 1 MOD - HI DENSITY MATRIX (See Figure 3-1)
*MP1 E1400-84105 1 EXT HANDLE KIT-BOTTOM
*MP2 E1400-84106 1 EXT HANDLE KIT-TOP
*PNL1 E1466-00201 1 PANEL-FRONT
*SCR1-*SCR2 0515-0368 2 SCREW-MACHINE ASSY M2.5 X 12MM-LG PH
*SCR9-*SCR10 0515-1375 3 SCREW-MACHINE M2.5 X 0.45 6MM-LG FLAT-HD
*SCR11-*SCR12 0515-1968 2 SCREW PH M2.5 X 11TX
Agilent E1465A/66A/67A Service Manual Replaceable Parts 45