Service manual

5. Record the DMM reading in Table 2-1 (LO to Chassis)
Figure 2-8. LO to Chassis Isolation Test Connections
10! RE-SAVE "DC_ISOL"
20 ASSIGN @Dmm TO 722
30 ASSIGN @Sw TO 70915
40 DISP CHR$(129)
50 DIM Cc$[2],Row$[2],Col$[2],A$[255],Conn$(2)[9],Value(2)
60 DATA COLUMN HI,COLUMN LO, CHASSIS
70 READ Conn$(*)
80 Cc$="01" ! Card number
90 OUTPUT @Dmm;"OHM 1E9"
100 PRINT "Equipment Connections "
110 PRINT
120 PRINT " 1. Turn mainframe and Agilent 3458A DMM power OFF"
130 PRINT " 2. Connect GPIB Cable from mainframe to DMM"
140 PRINT " 3. Install Component Assembly in Mainframe"
150 PRINT " 4. Attach Test Fixture to Component Assembly"
160 PRINT " 5. Turn Mainframe and Agilent 3458A power ON"
170 DISP "Press Continue when ready to begin testing "
Agilent E1465A/66A/67A Service Manual Verification Tests 31