Manualshelf

Service manual

ManualsBrandsAgilent Technologies ManualsBusiness equipmentE1465A
11121314151617181920
Environment The recommended operating environment for the matrixes is:
Environment Temperature Humidity
Operating 0
o
C to +55
o
C <65% relative (0
o
C to +40
o
C)
Storage and
Shipment
-40
o
C to +75
o
C <65% relative (0
o
C to +40
o
C)
Matrix
Description
The Agilent E1465A/E1466A/E1467A matrix modules are "instruments" in
the slots of a VXIbus mainframe. Each module is assigned an error queue,
input and output buffers, and a status register.
NOTE
Instruments are based on the logical addresses of the plug-in modules. See
the Agilent 75000 Series C Installation and Getting Started Guide to set the
addresses to create an instrument.
Each matrix has two parts: a component module and a terminal module (See
Figure 1-1). The component module contains 256 latching relays
implemented as four 4 X 16 submatrixes. The terminal ,modules convert
these submatrixes into a 16 X 16 (Agilent E1465A), 4 X 64 (Agilent
E1466A), or 8 X 32 (Agilent E1467A) matrix. The terminal module
matrixes are two-wire crosspoint switching (HI and LO). The matrix
module number reported in response to the SCPI SYSTem: commands is
determined by the terminal module installed. With no terminal module
installed, the model number is reported as E1466A.
Matrix
Specifications
Specifications are listed in Appendix A of the Agilent
E1465A/E1466A/E1467A Relay Matrices User’s Manual. These
specifications are the performance standards or limits against which the
modules may be tested.
Matrix
Serial Numbers
Devices covered by this manual are identified by a serial number prefix
listed on the title page. Agilent Technologies uses a two-part serial number
in the form XXXXAYYYYY, where XXXX is the serial prefix, A is the
country of origin (A=USA), and YYYYY is the serial suffix. The serial
number prefix identifies a series of identical instruments. The serial number
suffix is assigned sequentially to each instrument. The serial number plate is
located on the right-hand shield near the backplane connectors.
16 General Information Agilent E1465A/66A/67A Service Manual