Service manual

Shipping
Guidelines
Follow the steps in Figure 1-3 to return the Module to an Agilent
Technologies Sales and Support Office or Service Center.
1 Prepare the Module
• Remove user wiring from terminal module
• Attach tag to module/pod that identifies
- Owner
- Model Number/Serial Number
- Service Required
• Place tagged device in approved anti-static bag
2 Package the Module
• Place packaged Module in shipping carton*
• Place 75 to 100 mm (3 to 4 inches) of shock-
absorbing material around the Module
• Seal the shipping carton securely
• Mark the shipping carton FRAGILE
3 Ship the Module to Agilent Technologies
• Place address label on shipping carton
• Send carton to Agilent Technologies
* We recommend that you use the same shipping materials as those used in factory packaging (available from Agilent Technologies).
For other (commercially-available) shipping materials, use a double wall-carton with minimum 2.4 MPa (350 psi) test.
Figure 1-3. Packaging/Shipping Guidelines
Chapter 1 General Information 15