User`s manual

15. Define the Segment Sequence Order
[SOURce:]LIST[1]:SSEQuence:SEQuence <segment_list>
This command determines the order in which the waveform segments
are to be executed. The names of each waveform segment to be
output must be separated by a comma (for example, A,B,C). See
“Sending Segment Sequences” on page 114 for more information.
16. Define the Waveform Segments Repetition Count
[SOURce:]LIST[1]:SSEQuence:DWELl:COUNt <repetition_list>
This command sets how many times each waveform segment is to be
executed. See “Sending Segment Sequences” on page 114 for more
information.
17. Select the User Name
[SOURce:]FUNCtion:USER <name>
This command sets the AFG to output the selected segment sequence.
The
<name> in this command the same name as the stored segment
sequence to be executed.
18. Initiate the Waveform
INITiate[:IMMediate]
This command generates an immediate output with the arm source set
to
IMMediate. Refer to Chapter 5 for triggering information.
Chapter 3 Generating Arbitrary Waveforms 95