User`s manual

Arbitrary Waveforms Flowchart
The flowchart in Figure 3-1 shows the commands and the command
execution order to generate arbitrary waveforms. The reset (power-on)
values of each command are also noted on the flowchart. Note that the
IEEE 488.2
*RST command places the AFG into its power-on state. Thus,
it may be unnecessary to execute all of the commands on the flowchart.
Remove the flowchart from the binder for easy accessibility. Refer to the
flowchart while doing the examples in this chapter, if desired.
Figure 3-1. Commands for Generating Arbitrary Waveforms
(continued on next page)
84 Generating Arbitrary Waveforms Chapter 3