User`s manual

Table B-7. Agilent E1445A Settings Conflict Error Messages (continued)
Settings Conflict Error Messages
SOUR2:VOLT:OFFS > maximum; SOUR2:VOLT:OFFS MAX set
SOUR:FUNC:SHAP SIN and TRIG:STAR:SOUR not INT1; TRIG:STAR:SOUR INT1 set
SOUR:FREQ1:START > SOUR:FREQ1:STOP; values exchanged
SOUR:FREQ1:STAR frequency < minimum; SOUR:FREQ1:STAR MIN set
SOUR:FREQ1:STAR frequency > maximum; SOUR:FREQ1:STAR MAX set
SOUR:FREQ1:STOP frequency < minimum; SOUR:FREQ1:STOP MIN set
SOUR:FREQ1:STOP frequency > maximum; SOUR:FREQ1:STOP MAX set
ARM:SWE:SOUR TTLT<n> and TRIG:SWE:SOUR TTLT<n>; ARM:SWE:SOUR IMM set
SWE:TIME < minimum; SWE:TIME MIN set
SWE:TIME > maximum; SWE:TIME MAX set
TRIG:SWE:TIM < minimum; TRIG:SWE:TIM MIN set
TRIG:SWE:TIM > maximum; TRIG:SWE:TIM MAX set
SOUR:FUNC:SHAP not SIN and SOUR:PM:STAT ON; SOUR:PM:STAT OFF set
SOUR:FUNC:MODE LIST|SWE and SOUR:PM:SOUR not INT; SOUR:PM:SOUR INT set
SOUR:VOLT voltage < minimum; SOUR:VOLT MIN set
SOUR:VOLT voltage > maximum; SOUR:VOLT MAX set
SOUR:FUNC:SHAP not DC and SOUR:VOLT voltage < 0.0V: absolute value of SOUR:VOLT set
OUTP:LOAD INF and current SOUR:VOLT unit W, DBM, OR DBMW: SOUR:VOLT:AMPL MIN (in V) set
SOUR:ARB:DAC:SOUR not INT or SOUR:FUNC:SHAP USER and current SOUR:VOLT unit not V/VPK:
SOUR:VOLT:AMPL MIN (in V) set
SOUR:FUNC:SHAP DC and current SOUR:VOLT unit not V: SOUR:VOLT value converted to volts
Appendix B Useful Tables 481