User`s manual

Settings Conflict Error Messages
Table B-7. Agilent E1445A Settings Conflict Error Messages
Settings Conflict Error Messages
SOUR:FREQ1:FIX frequency < minimum; SOUR:FREQ1:FIX MIN set
SOUR:FREQ1:FIX frequency > maximum; SOUR:FREQ1:FIX MAX set
SOUR:FREQ2:FIX frequency < minimum; SOUR:FREQ2:FIX MIN set
SOUR:FREQ2:FIX frequency > maximum; SOUR:FREQ2:FIX MAX set
SOUR:FREQ1:RANG frequency > maximum; SOUR:FREQ1:RANG MAX set
TRIG:STAR:GATE:SOUR EXT and SOUR:FREQ1:FSK:SOUR EXT; TRIG:STAR:GATE:STAT OFF set
TRIG:STAR:GATE:SOUR TTLT<n> and SOUR:FREQ1:FSK:SOUR TTLT<n>; TRIG:STAR:GATE:STAT OFF set
SOUR:FREQ1:FSK frequency < minimum; SOUR:FREQ1:FSK MIN set
SOUR:FREQ1:FSK frequency > maximum; SOUR:FREQ1:FSK MAX set
TRIG:STAR:SOUR and SOUR:ROSC:SOUR both EXT; SOUR:ROSC:SOUR INT1 set
TRIG:STAR:SOUR and TRIG:STOP:SOUR both BUS; TRIG:STOP:SOUR HOLD set
TRIG:STOP:SOUR EXT and TRIG:STAR:GATE:SOUR EXT; TRIG:STOP:SOUR HOLD set
TRIG:STOP:SOUR EXT and SOUR:FREQ1:FSK:SOUR EXT; TRIG:STOP:SOUR HOLD set
OUTP:LOAD not equal to OUTP:IMP or INF; OUTP:LOAD set to OUTP:IMP value
SOUR:FUNC:SHAP DC and INIT; INIT ignored
SOUR:ARB:DAC:SOUR not INT and INIT; INIT ignored
Frequency list value out of range; SOUR:FREQ1:MODE FIX set
SOUR:FREQ1:MODE LIST and no frequency list defined; SOUR:FREQ1:MODE FIX set
SOUR:VOLT+SOUR:VOLT:OFFS < minimum; SOUR:VOLT:OFFS MIN set
SOUR:VOLT+SOUR:VOLT:OFFS > maximum; SOUR:VOLT:OFFS MAX set
SOUR2:VOLT:OFFS < minimum; SOUR2:VOLT:OFFS MIN set
480 Useful Tables Appendix B