User`s manual

Table B-6. Agilent E1445A Error Messages (continued)
Code Message Description
+1015 Illegal when SOUR:ARB:DAC not
INT
SOUR:LIST1 commands cannot be executed unless
the DAC data source is internal.
+1016 Illegal when VIN:LBUS:MODE not
CONS
The operating mode for the local bus is "off" and
SOUR:ARB:DOWN is set to LBUS.
+1017 Illegal when SOUR:FUNC:SHAP
RAMP|SQU|TRI set
The output function must be SINusoid when testing
the local bus (VINS:CONF:TEST:CONF).
+1018 Illegal while calibrating Commands cannot be sent to the Agilent E1445A
while the device is calibrating.
+1019 Illegal while not calibrating The command is only valid while the Agilent E1445A
is calibrating.
+1020 Illegal while initiated and
SOUR:PM:SOUR not INT
Frequency changes during phase modulation can
only occur when SOUR:PM:SOUR is INTernal.
+1021 Test data byte count not even
number
The length parameter for the command
VINS:CONF:TEST:CONF is not an even number.
+1022 VXI data transfer bus not active VINS:CONF:VME:REC:ADDR:DATA? is executed
and A24 address space is not being written to.
+1100 Illegal segment name Attempting to download to a segment that doesn’t
exist, or selecting a segment name that’s the same as
an existing sequence name.
+1101 Too many segment names There are >256 segment names defined. Use
SOUR:LIST1:SEGM:DEL:SEL to delete the current
(selected) segment, or SOUR:LIST1:SEGM:DEL:ALL
to delete all segments.
+1102 Segment in use Trying to delete a segment that is within a sequence.
+1103 Segments exist Trying to change the data format of a segment that
already exists.
+1104 Segment lists of different lengths The length of a segment’s voltage list does not equal
the length of its marker list and its marker list does
not equal 1.
+1105 Segment list has zero length Querying a voltage, marker, or dac code list that has
no data.
+1106 Segment name not DEFined Trying to load segment memory and memory has not
been reserved by the SOUR:LIST1:SEGM:DEF
command.
+1107 Segment name already defined Defining a segment and a segment by that name
already exists.
+1108 No segment name SELected Trying to load a segment that has not been selected.
478 Useful Tables Appendix B