User`s manual

Table B-1. Agilent E1445A Example Program Listing (continued)
Program Type Program Name Language Description
Sweeping,
Frequency Lists,
Frequency-Shift
Keying
(Chapter 4)
SMPLSWP1
LIST1
SMPLSWP2
LISTDEF
LOG_SWP
SWP_PVST
LIST_TME
SWP_ARB
SWP_LEVL
FSK1
FSK2
FSK_ARB
BASIC, Visual BASIC,
Visual C/ C++
"
"
"
"
"
"
"
"
"
"
"
0 Hz to 1 MHz sweep using start and stop frequencies.
1 kHz, 10 kHz, 100 kHz, 1 MHz frequency list.
1 kHz to 21 kHz sweep using start and span frequencies.
Definite length arbitrary block frequency list
Seven point logarithmic frequency sweep.
Setting the sweep time.
Setting the time through a frequency list.
Sweeping an arbitrary waveform.
Sweep with output leveling.
Frequency-shift keying with the FSK In control source.
Frequency-shift keying with the TTLTrg control source.
Frequency-shift keying of an arbitrary waveform.
Arming and
Triggering
(Chapter 5)
EXT_ARM
BURST
DIV_N
LOCKSTEP
STOPTRIG
GATE
SWP_TRIG
SWP_STEP
LIST_STP
BASIC, Visual BASIC,
Visual C/ C++
"
"
"
"
"
"
"
"
Arming the AFG with a signal applied to the Start Arm In
BNC.
5 cycle burst for each external arm.
10 MHz using the frequency2 generator.
Triggering Two AFGs with a common trigger signal.
Aborting a cycle count using stop triggers.
Gating the output on and off.
Arming and triggering a sweep using group execute
trigger.
Arming and triggering a sweep.
Arming and triggering a frequency list.
Marker Outputs
(Chapter 6)
MARKSEG1
MARKSEG2
MARKTRG
DRIFT
BASIC, Visual BASIC,
Visual C/ C++
"
"
"
Outputting marker pulses with selected amplitude points.
Outputting a single marker pulse.
Outputting a marker pulse with each amplitude point.
Two AFGs using the same reference osc.
Appendix B Useful Tables 465