User`s manual

• Related Commands: *LRN?, *RCL, *RST
•
*RST Condition: unaffected
• Power-on Condition: all saved states set to the same state as the *RST state
*SRE and *SRE?
*SRE <mask> specifies which bits of the Status Byte Register are enabled to
generate a service request (VXIbus reqt signal). Event and summary bits are always
set and cleared in the Status Byte Register regardless of the enable mask. The
<mask> is the sum of the decimal weights of the bits to be enabled.
*SRE? returns the current enable mask.
Parameters
Parameter
Name
Parameter
Type
Range of
Values
Default
Units
<
mask>
numeric 0 through 255 none
A 1 in a bit position enables service request generation when the corresponding
Status Byte Register bit is set; a 0 disables it.
Comments • Executable when Initiated: Yes
• Coupling Group: None
• *RST Condition: Unaffected
• Power-On Condition: No bits are enabled
Example Enable Service Request on Message Available Bit
*SRE 16 Enables request on MAV.
Chapter 8 Command Reference 425