User`s manual

[:STARt]:COUNt
TRIGger[:STARt]:COUNt <number> would normally specify the number of
triggers the Agilent E1445A would accept after an
INITiate:IMMediate command
before returning the start trigger sequence to the wait-for-arm state. However, since
this is equal to the length of the current waveform, and is not configurable here, the
only legal value for this command is 9.91e37 or NaN (not a number).
There is no need to send this command. It is included for SCPI compatibility
purposes only.
Parameters
Parameter
Name
Parameter
Type
Range of
Values
Default
Units
<
number>
numeric 9.91e37 | NAN | MINimum |
MAXimum
none
MINimum and MAXimum select 9.91e37 triggers.
9.91E+37 is equivalent to NAN.
Comments • Executable when Initiated: Query form only
• Coupling Group: None
• Related Commands: ABORt, INITiate:IMMediate
•
*RST Condition: TRIGger:STARt:COUNt 9.91e37
Example Setting the Start Trigger Count
TRIG:COUN NAN
TRIGger
392 Command Reference Chapter 8